Table valve generally use ball valve, table valve after the cone type plunger valve.
Advantages of ball valve
Simple structure, small volume, light weight.
Fluid resistance is small, full diameter ball valve basically no resistance.
Good sealing performance. The ball valve has two sealing surfaces, and the sealing of the hard sealing ball valve is manually ground, until the spool and the sealing ring can be used. Like the corrosion resistant ball valve, the valve body cavity will be widely used a variety of plastics, good sealing performance, in the vacuum environment has been widely used.
Easy to operate. As a switch, cut off or change the flow of the medium of the valve, in use only need to rotate 90 degrees can, and the torque is small.
A wide range of applications and applications. Ball valve diameter from small to a few millimeters, large to a few meters, from really high altitude to high pressure can be used. Moreover, ball valves have been widely used in petroleum, chemical industry, power generation, paper making, atomic energy, aviation and rocket fields.

A bolt is a type of fastener composed of two parts, head and screw, used to fasten the connection of two parts with a through hole. It is an anchorage component that will be anchored to the hardened concrete substrate.

Quick connector is a connector that can connect or disconnect pipelines without tools. The quick joint can be divided into: quick joint with air, quick joint with oxygen fuel gas, quick joint with gas liquid sharing, quick joint with oil pressure, quick joint with inert gas, quick joint with cooling water temperature oil, quick joint with semiconductor.

U-shaped bend is also called bend pipe, it is also a kind of pipe, U-shaped bend is divided into cold simmering and hot simmering. Generally small and medium pipe diameter elbow can be obtained by cold bending; Large diameter pipe will need hot bending.- Wenzhou Yuzheng Valve Co.,Ltd

High platform ball valve and flange gate valve is the same type of valve, the difference is that its closing part is a ball, the ball rotates around the center line of the body to achieve the opening and closing of a valve. Ball valves are mainly used to cut off, distribute and change the flow direction of the medium in the pipeline. - Wenzhou Yuzheng Valve Co.,Ltd

Stainless Steel Flanged H44W Swing Check Valve, find complete details about Stainless Steel Flanged H14W Swing Check Valve - Wenzhou Yuzheng Valve Co.,Ltd

Stainess Steel Seamless flanged pipe fittings